Eaton S090ST, Руководство пользователя

Страница: 28 / 63

27
ROTARY TOW BEHIND REV010322
Maintenance
NOTE: The operations and maintenance included in this section refer to use under normal conditions. In harsh or
difficult conditions such as temperature extremes, particulate filled atmospheres, elevation differences, etc. You must
perform some operations more frequently, and other precautions must be taken. Consult the manufacturer for the
specific maintenance needs that apply to your application.
Break In
The Compressor must be closely monitored during the break in period. The break in period refers to the first 50 hours of
operation of the compressor. Namely the first 50 hours of actual run time. The following should be performed at the end
of the break in period.
BREAK IN MAINTENANCE
Compressor set 1. Check drive belt tension
2. Purge fuel tank and fuel circuit
3. Check fuel pre-filter
4. Verify bolt torque on all bolts
Engine 1. Check and clean air filter
2. Drain the sump
3. Change the oil filter cartridge
4. Change the fuel filter cartridge
5. Check fan belt tension
6. Verify check valve clearance
Compressor 1. Check and clean air filter
2. Change oil filter
3. Check control functions (speed and pressure)
DANGER: NEVER remove lids, caps, and any other components while the
compressor is working and/or under pressure. Stop the compressor and
remove the ability for the compressor to start by removing the ignition key.
Verify the unit has no stored pressure before servicing or inspecting.