Figure 20.
Select Shutdown Option
Figure 21.
Select Event and Logging Options
Figure 22.
Verify Configuration Settings
Figure 23.
Clear Communication Message
EATON
Powerware
®
ConnectUPS
t
Web/SNMP Adapter (E Model) Quick Start Instructions 164950186 Rev A
11
10.
Select your preferred method of shutting down your system
(see Figure 20). The default selection is recommended.
Select
Next
.
11.
The Event and Logging Options dialog opens (see Figure 21).
Select
Next
.
12.
Verify the configuration settings are correct and select
Finish
(see Figure 22).
13.
A pop-up message indicates that communication with the
adapter is established (see Figure 23). Select
Clear
to
acknowledge the message.
14.
Repeat Steps 1 through 13 on all computers powered by the
corresponding UPS using this specific adapter.
NetWatch installation and configuration is now complete.
Powerware, LanSafe, and PowerVision are registered trademarks and ConnectUPS is a trademark of Eaton
Power Quality Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation.
HyperTerminal is a registered trademark of Hilgraeve.
