![background image](http://html1.mh-extra.com/html/eaton/power-xpert-pxr-10/power-xpert-pxr-10_manual_4153055144.webp)
10 Industrial Ethernet Communication Adapter Modules (ECAM)
10.3 Profinet
140
PXR Electronic trip unit
01/21 MN012005EN
www.eaton.com
10.3.4.3 Setting register
The release settings are arranged in three groups (groups 0 to 2).
Before reading or writing the settings, the appropriate group should be
selected. Access to the groups are obtained via API 0 and index 3, which is a
R/W register used to select the respective group (default: group 0).
The high byte contains the desired group number, while the low byte must
contain the value 255 (0x0FF).
Prior to writing the settings, the correct password must be entered via API 0
and index 2, and the settings have to be written within 10 seconds of the
password check.
For trip units that support settings, the settings of groups 0, 1 and 2 should
be written one after the other.
The setting groups are assigned as follows:
•
Group 0: System group
•
Group 1: Protective group
•
Group 2: Modbus group
Содержание Power Xpert PXR 10
Страница 4: ...II ...
Страница 40: ...4 Protection settings 4 12 Residual life indicator 36 PXR Electronic trip unit 01 21 MN012005EN www eaton com ...
Страница 166: ...11 Troubleshooting 160 PXR Electronic trip unit 01 21 MN012005EN www eaton com ...
Страница 170: ...12 PXR25 Navigation menu 164 PXR Electronic trip unit 01 21 MN012005EN www eaton com ...