background image

18

Green Motion Fleet & Green Motion Building

GREEN MOTION FLEET & BUILDING

   www.eaton.com

Technical specifications

Warranty statement

Catalog number

GMEV80CME1B-WC

GMEV80CMC1B-WC

GMEV40CME1B-WC

GMEV40CMC1B-WC

Electrical input

Input power

19.2kW at 240Vac; 16.6kW at 208Vac

9.6kW at 240Vac; 8.3kW at 208Vac

Input voltage

208-240 Vac

208-240 Vac

Input (amperage) current

80 A

40 A

Input OCPD (Breaker) rating

100 A

50 A

Electrical output

Power output

19.2kW at 240Vac; 16.6 kW at 208Vac

9.6kW at 240Vac; 8.3kW at 208Vac

Output voltage

208/240 Vac

208/240 Vac

Output amperage

80 A

40 A

Connectivity

Wi-fi, Ethernet

Cellular, Ethernet

Wi-fi, Ethernet

Cellular, Ethernet

Other specifications 

Connector

SAE J1772

Wiring

Hardwire

RFID

Yes

Overvoltage protection

Yes

Mounting options

Wall and pedestal mount

LED indications

R/G/B LEDs to indicate charger status

Cable length (in feet)

25

Safety

ETL

Ground fault protection

20 mA

Overcurrent protection

Yes

Frequency rating

60 Hz

Ambient operating temperature

–30 °C to +50 °C

Storage temperature

–40 °C to +70 °C

Humidity

0% to 95%, noncondensing

Warranty

3 years

Enclosure

NEMA-3R rated for outdoor installation

Certifications

ETL, SAE, NFPA, FCC Part 15, Energy Star

Description

Specification

Warranty for Products. Seller warrants that the Products manufactured by it 
will conform to Seller’s applicable specifications and be free from failure due to 
defects in workmanship and material for three (3) year from the date of original 
purchase.  In the event any Product fails to comply with the foregoing warranty 
Seller will, at its option, either (a) repair or replace the defective Product, or 
defective part or component thereof, with an equivalent Product or component, 
F.O.B. Seller’s facility freight prepaid, or (b) credit Buyer for the purchase price 
of the Product. All warranty claims shall be made in writing.   Seller requires 
all non-conforming equipment and material be returned for evaluation unless 
specifically stated otherwise in writing by Seller.  This warranty does not 
cover failure or damage due to storage, installation, operation, or maintenance 
not in conformance with Seller’s recommendations, including as set forth in 

these Terms and Conditions of Sale, and industry standard practice or due to 
accident, misuse, abuse, or negligence. This warranty does not cover breach of 
data or system security, including that of information technology infrastructure, 
computers, software, hardware, databases, electronic systems (including 
database management systems), and networks. This warranty does not cover 
reimbursement for labor, gaining access, removal, installation, temporary 
power, or any other expenses, which may be incurred in connection with repair 
or replacement. This warranty does not apply to equipment not manufactured 
by Seller. Seller limits itself to extending the same warranty it receives from 
the third-party supplier, to the extent such third party permits assignment of 
its warranty. For all other Terms and Conditions of Sale, please refer to Eaton’s 
Selling Policy 25-000.

Содержание Green Motion Fleet























Отзывы: