15
Installation Guide
GREEN MOTION FLEET & BUILDING
www.eaton.com
STEP D-3
D
Mount a second EV charger to a pedestal
Remove the bracket
(1)
and
NEMA plug
(2)
from the
upper access panel
(4)
.
Only remove NEMA plug
(3)
if you intend to connect the
EV charger to Ethernet .
Install the adapter plate/access panel assembly
(1)
onto the
pedestal
(2)
using the ten speed screws
(3)
.
Install the last bolt,
washer, and nut
(4)
to
the plate assembly .
Repeat Steps C-3 through
C-11 to mount the second
EV charger.
STEP D-1
STEP D-2
Reference:
1
.
Bracket
2
.
NEMA plug
3
.
NEMA plug (Ethernet)
4
.
Upper access panel
5
.
Adapter plate
6
.
Hex bolts, washers, nuts - x3
Reference:
1
.
Adapter plate
2
.
Pedestal
3
.
Speed screws - x10
4
.
Hex bolts, washers, nut
!
2
1
3
4
4
5
6
3
Install adapter plate
(5)
to
upper access panel
(4)
using
the top three holes with hex
bolts, washers, nuts
(6)
.
1
2
4
