Eaton ER9.3-10, Руководство пользователя

Страница: 7 / 24

Œ  Ž. ‘ ’“4” •–8—˜ ™.š“› œ  œ › ž —@š –.›  —8Ÿ ¡
¢ £ ¤ ¥ ¦ § £ ¨ ¤ © ª § «
¬­8®¯8°.±8­²V³8´®µV¬¯¶³ · ¸ ¹ º » º ¼ ½b¾ ¿ À Á ÂhÃÄÅ Æ4ÇÈÅ É8Ã8ÃÊ
Ë Ì Í Î Ì Ï Ð Ñ
ÒÓÔÕÓÖ ×Ø ÙÚÛÜÛÛÛÛÝ!ÞßàÝÛ á â ã ä
31
å æ
48
Parameters Range, characteristics
Output signals
Solenoid current 2 output stages for up to 3.5 A; with over-energization and quick de-
energization
Analog output 1 output, 12 Bit resolution, 0 ..
±
10 V for controlling subsequent
electronics
Monitor output 1 output, 12 Bit resolution, 0 ...
±
10 V; for monitoring internal values
Digital outputs 2 outputs, voltage level 0 V / 24 V,
10 mA (Error, Comparator)
Test jacks Solenoid current, sensor 1, set value, m onitor and GND
Auxiliary voltage
±
10 V, max. load 10 mA
Interface RS232 with 9-pol Sub-D connector on front panel and a second
connector is available on the back
Display and operation 4 digit display, 6 buttons (up, down, left, right, enter and Esc)
Status-LED’s: PW (Power), ER (Error), EN (Enable), SP1 ...SP4 (S1.01
... S1.04), RP0 (Ramp = 0),
Frequencies and cycle times
PWM Frequency 18 kHz
Cycle times Current controller ca. 0,22 msec
Inner closed loop controller ca. 0,22 msec (for valve feedback)
External closed loop controller 2 ca. 0,44 msec
Table 1: Parameters of digital controller card ER9.3-10