Eaton ELPRO 415U Скачать руководство пользователя страница 37

Страница: 37 / 93

User Manual

MN032006EN

Effective December 2017

415U Condor-long-range

wireless I/O and gateway

EATON

www.eaton.com

Dashboard configuration

The 451U-2 provides a dashboard feature to allow users to remotely

access a view of the status of the device’s I/O and registers. Any

authorized user can access the device’s dashboard remotely using a

Web-browser. You configure which registers will be displayed on the

dashboard, and how they will be displayed.

Figure 53. Example dashboard display

To access the dashboard, use a Web-browser to browse to the

device’s IP address. The dashboard display updates automatically.

To configure the dashboard display, select the “Dashboard” tree

node under the device that you want to configure.

Figure 54. Dashboard configuration

You configure these items for the entire dashboard page:

Enable home Page

Redirection:

Checking this button makes future access to the device’s IP address directly to the dashboard. This simplifies access

to the dashboard for users that are unfamiliar with the product. If this button is left unchecked, accessing the device

will take users to the device’s home page. (From the home-page, you can still access the dashboard by clicking a link

to view the dashboard).

Page Title:

This is the title that will be displayed at the top of the dashboard view.

Display Configuration

Page Link:

If this is selected, the dashboard view provides a link labeled “Configuration”. This provides a link to the device’s regular

home page. If you don’t want your users to have easy access to the device’s home page, then un-check this button.

Note

: You can still access the home page by typing in full address to your browser bar:

http://<Device_IPAddress>/operator/main.asp

Add” and “Delete”

buttons:

These let you add and delete table rows. Each row corresponds to an item on the dashboard display.

“Move Up” and

“Move Down”

buttons:

These let you adjust the order items are displayed on the dashboard. Items are displayed on the dashboard in the

same order as they are listed in the table.

Содержание ELPRO 415U






























































































Результаты поиска

Содержание ELPRO 415U

Отзывы:

Похожие инструкции для ELPRO 415U

Бренды по названию

Популярные бренды

Eaton ELPRO 415U, Руководство пользователя

Результаты поиска

Содержание ELPRO 415U

Отзывы:

Похожие инструкции для ELPRO 415U

Бренды по названию

Популярные бренды