- 1 -
The ELCM-TC04ANNN temperature measurement module supports 4
channels of thermocouple temperature sensors (J-type, K-type, R-type,
S-type, T-type, E-type, N-type,
±
80mV) and converts these signals into
16-bit digital data. You can select temperatures in Celsius (resolution: 0.1°C)
or Fahrenheit (resolution: 0.1°F). The data in the module may be accesses
using the FROM/TO instructions, or you may read the average value of
channels directly by using the MOV instruction (Please refer to allocation of
special registers D9900 ~ D9999).
This instruction sheet provides only information on the electrical
specification, general functions, installation and wiring. It should be read
and understood before attempting to install or use the module.
Further information can be found in the
“ELC Programming Manual” and
“ELC Special Modules Operation Manual”.
This module is a part of an OPEN TYPE control system. The ELCM
should be kept in an enclosure away from airborne dust, humidity,
electric shock risk and vibration. Your application may require that the
enclosure be locked to prevent non-maintenance staff from operating the
controller (e.g. key or specific tools that are required for opening the
enclosure) in cases where danger and damage to equipment or
personnel may occur. Do NOT touch the terminals while power is
applied.
DO NOT connect AC input power to any of the input terminals; otherwise
serious damage may occur. Check all the wiring before switching on the
power.
Ensure that the ground terminal
is properly grounded in order to
prevent electromagnetic interference
This manual is subject to change without notice.
Product Profile & Dimension
Removable I/O terminal
Panel mounting hole
DIN rail
mounting slot
(35mm)
Power / A->D / Error indicators
I/O module
connection port
I/O terminal No.
Module Name
I/O module clip
I/O module connection port
ELCM-T C04ANNN
4A I-T C
