![background image](http://html1.mh-extra.com/html/eaton/elc-caenet/elc-caenet_manual_524569056.webp)
ELC Distributed I/O Adapters
MN05002003E
For More Information visit:
www.eaton.com
125
D2000 – D2003 ELC-AN06AANN
4 analog inputs
D3000
ELC-AN06AANN Configuration
word
D3001 – D3002 ELC-AN06AANN
2 analog outputs
D2004 – D2007 ELC-AN04ANNN
4 analog inputs
D3003
ELC-AN04ANNN Configuration
word
When finished, click Apply, then OK to save all changes. Place the ELC-CAENET module into
Run mode using the switch on the module. The ELC-PV controller must contain an instruction
that moves a 1 to CR#15 in the COENETM module. Below is the instruction List rung of code
that is required in the ELC program to instruct the Ethernet module to begin polling the
ELC-CAENET module.
LD
M1000
Always
True
bit
TO K100 K15 K1 K1
Send a 1 to CR#15 in the COENETM to begin polling
Note: The K100 in the TO instruction above is the designation for the first Communication
module to the left of the ELC-PV controller. The ELC-PV controller supports up to 8
communication modules. Send a K0 to stop polling (LD K100 K15 K0 K1).
Click Apply, then OK. When the controllers are placed into the run mode, the messages will
begin. When data is placed into D200-D209 in the master controller, it will be sent to
D100-D109 in the remote controller. Data in D300-319 in the remote controller will be sent to
D50-D69 in the master controller.
4.10
Using a Rockwell CompactLogix PLC and RSLOGIX5000 to Control and
Monitor I/O Data from Distributed I/O Adapter ELC-CAENET via Ethernet
IP
This application example will demonstrate how to set up a Rockwell CompactLogix PLC with an
imbedded Ethernet IP scanner port to read and write I/O data from an ELC-CAENET Ethernet
distributed I/O adapter. The software used to configure the adapter is called ECISoft and is
included in ELCSoft. The software used to configure the CompactLogix PLC and its Ethernet IP
port is RSLOGIX5000.
The system used for this application example consists of the following:
(1) CompactLogix L23E controller
(1) ELC-CAENET Ethernet distributed I/O adapter
(1) ELC-PS02 24vdc power supply
(1) Ethernet switch 10/100mbps