![background image](http://html1.mh-extra.com/html/eaton/elc-caenet/elc-caenet_manual_524569028.webp)
ELC Distributed I/O Adapters
MN05002003E
For More Information visit:
www.eaton.com
97
IF-THEN
1. Enable
Check the box to enable IF-THEN.
2. IF
For the trigger condition, you can select bit devices RX, RY, C, T, RT or word device RCR
and set them to ON, OFF, Rising, Falling, >, <, =, <>, >= or <=. The trigger condition can
be AND or OR. When the device is a register, the allowed trigger range will be K-32,768 ~
K32,767.
3. THEN
For the execution, you can select bit devices RY, C, T, RT or word device RCR and Set,
Reset, Toggle or set up a value for them. Please refer to the explanations on IF#13 ~
IF#24. When the device is a register, the allowed trigger range will be K-32,768 ~
K32,767.
4. Add, Modify, Clear, Delete
All the settings above can be added to the IF-THEN table below, or you can modify, clear
or delete the settings.
5. Up,
Down
You can move the IF-THEN setting up or down to change the execution order.