![background image](http://html1.mh-extra.com/html/eaton/elc-caenet/elc-caenet_manual_524569040.webp)
ELC Distributed I/O Adapters
MN05002003E
For More Information visit:
www.eaton.com
109
to lock the settings in the ELC-CAENET.
Setting up a password
1. Login
Log in to check and modify parameters.
2. Password
setup
Check the “Modify” box to set up the password.
3. Password
Enter maximum 4 characters. Leave it blank to clear the password.
4. Confirm
password
Enter the new password again.
Note:
Once the password is set, none of the configuration pages can be accessed unless
you enter the password. However, if you access the ELC-CAENET via RS-232, you
can return the module to defaults whether the password isset or not. For example, if
you have locked ELC-CAENET but forget the password, you must return the
ELC-CAENET to default settings viay RS-232, and all the settings will return to
default.
4.8.15 Returning to Default Settings
If you need to clear all the settings and return them to defaults, check the “Factory Setting” box.
Returning to default settings