12
Technical Data
PR216-219-508-01
Effective March 2017
Installation and user manual for the
BiWire / Conventional Repeater
Battery Connections
1. Connect the
BLACK
battery wire to the
BLACK (-)
battery
terminal of Battery B (Figure 23)
2. Connect the
RED
battery wire to the
RED (+)
battery
terminal of Battery A (shown as grey)
3. Connect the link cable between the two remaining
terminals
CAUTION
DO NOT USE A HIGH VOLTAGE TESTER WHEN WIRING IS
CONNECTED TO ANY ELECTRONIC EQUIPMENT.
NOTE
IT IS IMPORTANT THAT ZONE CABLING IS CONNECTED
TO THE CORRECT ZONE INPUT OTHERWISE ANY FIRE OR
FAULT INDICATION ON THE PANEL WILL NOT MATCH THE
ZONE MAP OF THE SITE, AND WILL NOT BE COMPLIANT
WITH BS5839
Figure 14. Battery Connection
Figure 15. Repeater Panel Wiring Diagram
