42
Appendix M: Alarm/status messages
DPCT IOM InsTruCTIOn OPeraTIOn Manual
MN124018EN January 2023 www.eaton.com
Remote Auto Start
The pump has started via a remote auto start signal.
Remote Auto Start Off
The input to the remote auto start terminals has been removed.
Remote Manual Start
The pump has started via a remote start signal.
RPT Timed Out
The running period timer has finished its timing cycle.
RPT Stopped
The Run Period Timer has finished timing or been cleared.
Speed SW Malfunction
The engine run signal has been removed prior to the controller initiating a stop.
SST Started
The sequential start timer has started timing.
SST Stopped
The sequential start timer has finished timing or been cleared.
System Startup
Power has been reapplied to the system and a successful system boot has been completed.
Transducer Fail
The controller has detected that the transducer has failed.
Weekly Test Done
The weekly test has been completed.
Weekly Test Fail
A Weekly test has been initiated; however, the engine has failed to start.
Weekly Test Start
The engine has started on a weekly test.
Weekly Test Stop
The Weekly Test Cycle timer has been cleared.
