Eaton DNP MINT Скачать руководство пользователя страница 14

Страница: 14 / 80

Instruction Leaflet IL

66A7638H03

Effective December 2010

Instructions for DNP MINT Translator Module

Installation and Use

EATON CORPORATION www.eaton.com

I.L. 66A7638H03

Effective September 2007

8.2.4

DNP Transfer Protocol

The DNP Transfer Protocol settings modify the

DNP MINT interface procedures to the DNP

network. These settings are only used when the

DNP MINT is functioning in the run (non

configuration) mode.

A DNP MINT or device setting with the “Enable

Solicited Static/Event Data Link Confirm” bit

reset / set will return solicited data to the master

device

using

the

UNCONFIRMED_USER_DATA

CONFIRMED_USER_DATA data link function

code, respectively. If set, data link transfers that

do not receive a confirmed response will be

retried depending on the “Data Link

Confirmation Retry Count” setting.

A device setting with the “Enable Unsolicited

Event Data Link Confirm” bit reset / set will

send unsolicited data to the master device using

the

UNCONFIRMED_USER_DATA

CONFIRMED_USER_DATA data link function

code, respectively. If set, data link transfers that

do not receive a confirmed response will be

retried depending on the “Data Link

Confirmation Retry Count” setting.

A DNP MINT or device setting with the “Enable

Solicited Static Application Confirm” bit set will

return solicited data to the master device with

the CON bit set (requesting a confirmation).

Note that all event data being returned are

required to set this CON bit.

A device setting with an “Enable Unsolicited

Class 1/2/3 Events” bit set will send unsolicited

data to the master device after the occurrence of

an event for that enabled class.

The DNP MINT binary counter objects cannot

be enabled for unsolicited messaging (i.e., set to

Class 1, 2 or 3). Thus setting the “Enable

Unsolicited Event Data Link Confirm” or

“Enable Unsolicited Class 1/2/3 Events” bits for

the DNP MINT summary would provide no

functionality.

8.2.5

DNP Network Idle Time To

Initiate Unsolicited Transmission

The DNP Network Idle Time To Initiate

Unsolicited Transmission setting is the number

of 10 ms increments the DNP MINT will wait

for the DNP network to be silent (inactive)

before it will attempt to transfer a pending

unsolicited message. This value is set in the

DNP MINT summary table and applies to all

DNP MINT messages (DNP MINT counters and

its 16 devices).

8.2.6

DNP Network Unsolicited Retry

Random Time Increment Mask

The DNP Network Unsolicited Retry Random

Time Increment Mask setting is used to mask a

random number generated by the DNP MINT

which will be added (in 10 ms increments) to the

DNP MINT to retry an unsuccessful

(unconfirmed) unsolicited message transfer

attempt. The additional time increment is added

to the DNP Network Idle Time if a message

different from the expected confirmation is

received. It is added to the DNP Application

Confirmation Wait Timeout if no response is

received. This value is set in the DNP MINT

summary table and applies to all DNP MINT

messages (DNP MINT counters and its 16

devices).

8.2.7

DNP Data Link Confirmation

Wait Timeout

The DNP Data Link Confirmation Wait Timeout

setting is the number of 10 ms increments the

DNP MINT will wait for a Data Link

confirmation from the master device, providing

data link confirmations are enabled (see

Section

8.2.4

). This value is set in the DNP MINT

summary table and applies to all DNP MINT

messages (DNP MINT counters and its 16

devices).

Содержание DNP MINT

















































































Результаты поиска

Содержание DNP MINT

Отзывы:

Похожие инструкции для DNP MINT

Бренды по названию

Популярные бренды

Eaton DNP MINT, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DNP MINT

Отзывы:

Похожие инструкции для DNP MINT

Бренды по названию

Популярные бренды