6
EATON CORPORATION Cutler-Hammer
Pow-R-Command 750 LCD Display Instruction Leaflet IL01412018E Effective: February 2009
Hit
SEL
to choose the
empty schedule
item. The following screen
is displayed:
Hit
SEL
to choose the
DAYS
: item. The following screen is displayed:
To choose all
weekdays (MTWThF)
or
weekends (Sat/Sun)
,
use
UP/DOWN
to highlight
Weekdays or Weekends
respectively
and hit
SEL
.
To clear all days from this schedule, but leave the hours intact
(perhaps for future use), highlight
Clear All Days
and hit
SEL
.
To schedule only specific days of the week, highlight
Pick
specific days
and hit
SEL
. The cursor will jump to Sunday of
the
specific days list
. Use
UP/DOWN
to move specific days
back and forth between the
YES
and
NO
rows. To choose a holiday
schedule, choose “H” in the specific day list. This schedule will then
run on the days added to the “Holiday List” (See Appendix A, Section
G). Use
SEL
to move across the row. Once in the specific days row,
you must move all the way across the row with
SEL
to return to the
previous menu.
Hit
BACK
to return to the
ENTER SCHEDULE DETAIL
screen.
Use
UP/DOWN
to highlight the
Start time
item. Hit
SEL
to begin
entering a start time for this schedule. The
hours column
will be
highlighted as shown below.
ENTER SCHEDULE DETAIL
For GROUP A
DAYS: _______
Start time: 12:00 AM
End time: 12:00 PM
Clear Schedule
Press BACK when done
PICK SCHEDULE DAYS
Weekdays____________
Weekends
Clear All Days
Pick specific days:
Yes:
No: SMTWTFSH
ENTER SCHEDULE DETAIL
For GROUP B
Days: Weekday
Start time:
12
:00 AM
End time: 12:00 PM
Clear Schedule
Press BACK when done
Use
UP/DOWN
to advance the
hours column
to the correct hourly
starting time. Hit
SEL
to move to the
minutes column
. Use
UP/
DOWN
to advance the
minutes column
to the correct minute
starting time. Hit
SEL
to move to the
AM/PM
column. Use
UP/DOWN
to select
AM
or
PM
for the starting time. Hit
SEL
to complete entering
the start time.
Use
UP/DOWN
to highlight the item. Follow the same procedure as
above to enter the schedule and time.
When the days, start time and end time have all been entered, hit
BACK
to return to the
MODIFY SCHEDULES
screen. The newly
entered schedule will now be in the list, as shown in the following
example:
Use
UP/DOWN
to select
empty schedule
and repeat the aforemen-
tioned steps to enter more schedules for this group if needed. If more
than three schedules are entered for a particular group, they will
extend to the next page. Use
UP/DOWN
to scroll the list to select
schedules or empty schedule on the next page.
Hit
BACK
twice to return to the
SELECT GROUP
screen. Use
UP/
DOWN
and
SEL
to choose another group to schedule. Repeat the
above steps to enter schedules for each remaining group in turn.
The PRC750 is now programmed. Hit
BACK
four times to return to
the top level and log out.
MODIFY SCHEDULES FOR
Group A OFFICE LIGHT
Use SEL to edit sch.
Days --ON-- --OFF-
Weekday 09:30A 05:30PP
(empty schedule)
