EATON CORPORATION Cutler-Hammer
Pow-R-Command 750 LCD Display Instruction Leaflet IL01412018E
©
Copyright 2009
3
5. Set Date/Time/DST/Location
From the
MAIN MENU
, select
Configure Date/Time
. The
following menu will be displayed:
Use
UP/DOWN
to select
Change Date
. Use
SEL
to move through
the date digits. Use
UP/DOWN
to set the month, day and year,
respectively. After setting the year, hit
SEL
one more time. The
new values will be displayed in the PRC750.
Use
UP/DOWN
to highlight
Change Time
. Use
SEL
to move through
the
time digits
. Use
UP/DOWN
to set the
hour, minute
and
AM/
PM
, respectively. After setting the
AM/PM
, hit SEL one more time.
The new values will be displayed on the PRC750.
Use
UP/DOWN
to highlight
Change DST
. Use
SEL
to start editing the
DST setting. Use
UP/DOWN
to choose
NONE, AUTO
or
MANUAL
. If
MANUAL
is chosen, settings for start and end date will appear. Hit
SEL
to jump to the
start date
. Use
UP/DOWN
to set the
month
and
day
values. Use
SEL
to move through the digits. After setting the
DST
setting (or dates for
MANUAL
), hit
SEL
one more time. The new values
will be displayed on the PRC750.
Use
UP/DOWN
to highlight
Change ASTRO Locate
. Hit
SEL
to start
editing the location. The following screen will be displayed:
Use
UP/DOWN
to set the latitude (LAT) value in degrees. The latitude
range is -90 (South) to +90 (North).
CONFIGURE DATE/TIME
Change Time 11:37 AM
Change DST MANUAL
St: mm/dd End: mm/dd
Change Astro Loc.
ASTRO LAT:
33.00
LON: 84.00
TIMEZONE: 5
RISE 06:30 SET 07:00
Note:
Sunrise/sunset calculations lose accuracy outside the -62 to
+62 range. Hit
SEL
to move to the longitude setting. Use
UP/DOWN
to set the longitude value in degrees. The longitude range is +180
(Alaska) to -180 (Western Pacific). Hit
SEL
to move to the
TIMEZONE
setting. Use
UP/DOWN
to set the
TIMEZONE
value in hours. The
TIMEZONE
range is +12 hours (west of GMT) to -12 hours (east of
GMT). After setting the
TIMEZONE
, hit
SEL
one more time. The new
values will be displayed on the PRC750. The
RISE
and
SET
times will
update with the new values calculated from the input latitude and lon-
gitude and the screen will return to the
Configure Date/Time
menu. Use
BACK
to return to the
MAIN MENU
.
6. Configure Breaker Group A
From the
MAIN MENU
, select
Configure Groups
. The following
screen will be displayed:
The
group
is shown, followed by its
current status
(
OFF
in
this example). The next line is the
group description
, if it
exists (
GROUP A LIGHTS
in this example), followed by the
number
of loads (breakers)
that has been associated with this group
(15 in this example). Another group can be selected by using the
UP/DOWN
arrows.
Hit
SEL
to select
Group A
. The following menu is displayed:
A. Associate Loads With the Group
Hit
SEL
to select
Associate Loads
. The following screen is
displayed:
SELECT GROUP
TO CONFIGURE:
Group A GRPA OFF
GROUP A LIGHTS
15 loads in group.
Use up/down/sel to
change selection
CONFIGURE GROUP A
Group A GRPA ON
OFFICE LIGHTING
Associate Loads______
Associate Inputs
Modify Schedules
Modify Description
Associate Loads
With Group A
Select loads for this
group individually
Add all loads which
are currently ON
Clear all loads from
this group
