9
6 First commissioning and modifying network settings
Installation and Operating Instructions Web-Controller
40071860236 (E) February 2019 www.eaton.com
PC network setting:
To modify the network settings of the PC open the sys-
tem control
Network and release centre
Modifier adapter settings
Right mouse click on “LAN connection”
Properties.
The following screen is displayed:
1
2
The following screen is displayed:
Mark the entry Internet protocol version 4
1
, then con-
tinue with “Properties”
2
.
Usually the network card is on DHCP, i.e.
“Automatically reference IP address”
Modify the entry to “Use the following IP address” and
specify the following values for the IP address and the
subnet mask (displayed automatically):
IP address:
192.168.1.50.
Subnet mask: 255.255.255.0.
Clicking on OK assumes the settings so that the web
page of the Web-Controller can now be opened
via any web browser, e.g. Firefox.