Application Example: Operating a C441 Motor Insight with a Siemens PLC on PROFIBUS-DP
60
C441 PROFIBUS Module User Manual
MN042002EN—July 2015
www.eaton.com
Downloading the Program to the Siemens S7 PLC
The project must first be compiled with no errors before it is downloaded to the PLC. In the Project
Tree under PLC_1 [CPU….], double click “Device configuration” as follows to display the Device
View containing the PLC.
Select the PLC then click the Compile button. The compile button is just to the left of the
Download button on the tool bar. Shown below are, from left to right: Compile button, download
button and the upload button. As you hover over each of these buttons in the software, it will
display its function.
