manualshive.com logo in svg

Eaton ARCON 2.0 Series, Инструкции по эксплуатации и настройке. Техническое описание.

Поделиться
Скачать
Eaton ARCON 2.0 Series Скачать руководство пользователя страница 79

79

 

ARC-SL is an fi bre sensor that can be mounted on the switchgear to monitor several com-
partments simultaneously (various bus-bar compartmets, etc.).

 The 

fi bre must not touch any live parts of the switchgear or other hot components, since too 

high temperatures may destroy the fi bre.

 

When mounting the sensor on the switchgear, ensure that the bending radius is long enough 
(min. 50 mm) and that it is safe from the sharp edges of the switchgear.

NOTE!  The sensor must not be exposed to direct sunlight or other strong light. Do not mount the 

sensor directly under a light source.

NOTE!  To avoid false tripping, cover any unused channels of the I/O unit.

 ARC-SM

 

The portable pin sensor can be temporarily connected to the I/O units. It is used to improve 
safety when working with live switchgear, for example, Attach the sensor close to the working 
area, for example in the breast pocket of the maintenance man. 

 

A pin sensor operates in the same way as a fi xed arc sensor. The only difference is free mo-
bility within the limits of the connecting cable.

 

Figure: Pin sensor ARC-SM

NOTE!  To avoid faulty tripping, disconnect the pin sensor from the system immediately after use.

Содержание ARCON 2.0 Series






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды