Eaton ARCON 2.0 Series, Инструкции по эксплуатации и настройке. Техническое описание., Страница: 35 / 85

35
3.4.1. Checking system confi guration
To check system confi guration in INFO mode, do the following:
Figure: Checking system confi guration in INFO mode
• Select the INFO mode using the up and down arrow keys.
• You can read the I/O unit address and the number of sensors stored in the memory
from the master unit‘s display.
• Use the side arrow keys to move between the I/O units.
• When the correct I/O unit shows on the display, press S to activate the INFO mode.
• To check the number of connected sensors, press E.
• The master unit will display the number of sensors connected to the I/O unit for two
seconds, after which it will show the number of sensors stored in the memory. If the
numbers are not the same, see section 3.1.3.
NOTE! Checking system confi guration will not affect the confi guration stored in the master unit‘s me-
mory. If you wish to modify the confi guration, see section 3.4.
INFO
S
E
number of
I/O UNIT sensors
Use push-button for read
number of I/O units and
sensors
( 1 sensor is missing )
number of
I/O UNIT sensors
number of
I/O UNIT sensors
Info E