manualshive.com logo in svg

Eaton ARCON 2.0 Series, Инструкции по эксплуатации и настройке. Техническое описание.

Поделиться
Скачать
Eaton ARCON 2.0 Series Скачать руководство пользователя страница 12

12

2.1.1.  Display and status indications

 

Figure: Master unit ARC-EM/2.0 - display and status indications

 

1.  Operating status indication lights, see section ‘Moving in menus’

 

 RUN  

normal operation

 

 INSTALL system 

confi guration

 

 INFO  

system  confi guration check

 

 TEMP SET  reserved for future use

 

 TEMP 

reserved for future use

 

 CURRENT  current setting limit and measurement indication

 

 ERROR 

reading and resetting of fault memory

 2. 

Display

 

3.  POWER indicator light, indicates all supply voltages are in order.

 

4.  COM indicator light, blinks in INSTALL mode when the master units and I/O units are
 communicating.

 

5.  ERROR indicator light, indicates internal fault detected by the relay self-diagnostics. 

NOTE!  The light also blinks dimly in normal operating mode (visible only in the dark).

 

6.  Trip indication lights, indicate which trip stages have been activated.

 

7.  I>int LED light, indicates overcurrent activation of the master unit.

 

8.  I>ext LED light, indicates overcurrent activation outside the master unit.

NOTE!  Any rippling in the display is due to its refresh rate.

NOTE!  Moving in the operating menus does not affect the operation of the arc protection; the system 

is ready to activate once the system has been confi gured and while the master unit is con-
nected to an operating voltage.

ARC-EM/2.0

Содержание ARCON 2.0 Series






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды