DPD-9E2305
8
1.
2.
3.
4.
4.3 EBM connection
Rack installation
A small amount of arcing may occur when
connecting an EBM to the UPS. This is normal and will
not harm personnel. Insert the EBM cable into the UPS
battery connector quickly and firmly.
To increase stability, it is preferable to place the
EBM below the UPS.
Extension Battery Module (EBM) Eaton 9EEBM72R is
compatible only with 9E2000IR and 9E3000IR UPS.
UPS must be switch off and disconnected from the
power supply prior to battery installation.
Only qualified service personnel is allowed to install the
EBM when UPS is working.
Remove UPS and EBM front panel.
Plug the EBM power cable(s) into the battery
connector(s). Up to 4 EBMs could be connected to the
UPS. Verify that the EBM connections are tight, and
that adequate bend radius and strain relief exist for
each cable.
Put back the UPS and EBM front panel.
Select the number of EBM connected through the
LCD (Settings > Battery Settings > EBM)
