DPD-9E2305
15
1.
2.
1.
2.
3.
5.5 Communication ports
Connection of RS232/USB communication port
Connect the RS232 (15) or USB (16) communication
cable to the serial or USB port on the computer
equipment.
Connect the other end of the communication cable
(15) or (16) to the USB (5) or RS232 (6)
communication port on the UPS.
The UPS can now communicate with Eaton power
management software.
You can improve the remote monitoring and power
managment of the UPS by adding a
compatible with the 9E product.
Please note that cable (15) is not supplied with your
equipment.
Installation of the communication cards
It is not necessary to shutdown the UPS before
installing a communication card.
Remove the slot cover (9) secured by screws.
Insert the communication card in the slot.
Secure the card cover with the two screws
to
connect the comm card to the ground.
