6
UPS 225 - 275 kVA/300kVAPF0.8
1027212
User’s and Installation Guide
Revision E
•
Single UPS with one UPM with a common battery, an FI-UPM with a common battery, and two to
four battery cabinets for the UPMs
•
Single UPS with one UPM with a separate battery, an FI-UPM with a separate battery, and two to
three battery cabinets per UPM
•
Single UPS with one UPM and a standalone battery rack system
•
Single UPS with one UPM with a common battery, an FI-UPM with a common battery, and one
standalone battery rack system for the UPMs
•
Single UPS with one UPM with a separate battery, an FI-UPM with a separate battery, and one
standalone battery rack system per UPM
•
Distributed bypass system with two to five UPSs and a customer-supplied tie cabinet
The UPS system configuration can be enhanced by adding optional accessories such as a Remote
Emergency Power-off (REPO) control, RMP II, or X-Slot communication cards.
1.4 Using this manual
This manual describes how to install and operate the Eaton 9395 UPS (225-275 kVA/300kVA) cabinet.
Read and understand the procedures described in this manual to ensure trouble-free installation and
operation. In particular, be thoroughly familiar with the REPO procedure (see Section “Using the
Remote Emergency Power-off switch” on page 95).
The information in this manual is divided into sections and chapters. The system, options, and
accessories being installed dictate which parts of this manual should be read. At a minimum, Chapters
1 through 4 and Chapter 7 should be examined.
Read through each procedure before beginning the procedure. Perform only those procedures that
apply to the UPS system being installed or operated.
1.5 Conventions used in this manual
This manual uses these type conventions:
•
Bold type
highlights important concepts in discussions, key terms in procedures, and menu
options, or represents a command or option that you type or enter at a prompt.
•
Italic
type highlights notes and new terms where they are defined.
•
Screen type
represents information that appears on the screen or LCD.
In this manual, the term UPS refers only to the UPS cabinet and its internal elements.
The term UPS system refers to the entire power protection system – the UPS cabinet, the battery
cabinet, and options or accessories installed.
Icon
Description
Information notes call attention to important features or instructions.
[Keys]
Brackets are used when referring to a specific key, such as [Enter] or [Ctrl].
