Eaton 199996, Руководство пользователя

Страница: 34 / 134

2. Safety regulations
2.3 Device-specific hazards
CAUTION
DESTRUCTION
The XP-504 should only be opened by the manufacturer or by an aut-
horized center. Operate the device until only with the enclosure fully
closed and sealed.
CAUTION
ELECTROSTATIC DISCHARGE
Do not touch components (e.g., connector pins) that are elec-
trostatic-sensitive.
Discharge any static electricity from your body before touching
the XP-504 (e.g., by touching an earthed metal object).
Electrostatic discharges may damage or ruin assembly parts.
Because of this, it is necessary to take precautions whenever hand-
ling the XP-504 cards.
Please refer to the guidelines for electrostatic-sensitive components
for more information (ESD guidelines).
CAUTION
INTERFERENCES
The values specified in the technical data, as well as the device's
electromagnetic compatibility (EMC), cannot be guaranteed if the fol-
lowing are used: unsuitable cables, improperly assembled and ter-
minated cables, and/or wiring that does not conform to the applicable
standards.
Only use cables assembled and terminated by professionals.
The cables being used must be assembled and terminated as requi-
red by the port/interface description in this document.
When wiring the XP-504, follow all instructions regarding how to wire
the corresponding port/interface.
All general Directives and standards must be complied with.
34
XP-504 04/2022 MN048028EN Eaton.com