易仕韦尔
EASYWELL
第
8
页
Fault symptom
Reason
Remove method
became less or no
fog
tank
b) The atomization chip is too
aging
c) The voltage became lower
d) The water level is too high or
less than the standard
e) There are oil in the water.
atomization chip
b) Replace the atomization chip
c) Keep the standard voltage
d) Adjust the water level
e) Clean the water tank and the
pipe
Off-odor exist in
the fog
There is foreign matter in the
tank or in the pipe
Remove the foreign matter inside
7. Maintenance
1. Water tank maintenance: Please replace the water in the water tank regularly to
reduce the deposition of scale in the atomizer.
2. Water tank cleaning: clean the water tank regularly. Turn off and uplog the
machine before cleaning so as to avoid contact incident.
3. Cleaning method: Turn the fixing screw on the cover of the water tank, and open
the tank cover plate(please pay attention to the circuit connection inside), use a
soft cotton close or brush to clean(Dish soap is available). see Fig 12. The scale
and other foreign matter around the water tank, then use clean water to flush out,
be careful not to spill water on the components and wiring to avoid short circuit.
(Don’t use high acid alkaline liquid cleaner to clean any parts of the atomizer.)
Remind:
We don’t recommend to add the water from the fog outlet or water
outlet, as the water level in the tank is difficult to be controlled by this way.
8. Precautions
1
、
The power supply must be grounded.
