EIO
-55
3
Typical Thermostat Home
Screens
The images below illustrate the typical home screens on the
EIO
thermostats. The screen is touch
sensitive and shows the current status of the thermostat. Inside the red/blue/white ring the thermostat
shows the current target temperature. The intensity of the red/blue ring changes based on the
temperature differing from the target temperature.
The small circle indicates the current room temperature (and if enabled the floor temperature and/or
outside temperature, and/or relative humidity via a smooth transition effect).
In the Cleaning Mode the number inside the large circle indicates the remaining cleaning time. The
Boost icon changes to Cleaning icon and by pressing it the cleaning mode can be cancelled..
In the Holiday Mode the home screen shows the current ECO mode target temperature, and ECO
icon. By pressing the Holiday Mode Icon, the holiday can be cancelled anytime.
Touchscreen
The
EIO
room thermostat home screen has multiple touch sensitive areas that allow the thermostat
settings to be changed.
•
UP and DOWN arrows; to alter the current target temperature temporarily.
•
SMALL ACTION CIRCLE (that contains current room temperature etc.); allows access to FUR-
THER SETTINGS AND INFORMATION screen.
•
FUNCTION BASED ICON; in holiday mode shows the holiday icon from where the holiday mode
can be cancelled, in cleaning mode shows the cleaning icon from where the mode can be can-
celled; in BOOST mode shows the BOOST icon from where the output can be Boosted on; in
OFF mode shows the OFF icon where the OFF mode can be cancelled.
•
ECO icon; when ECO mode is on, the ECO mode can be cancelled from the button.
•
A/C ICON; when AC is enabled the AC can be enabled/disabled from this icon (systems only).
•
LIGHTS ICON; when LIGHTS are enabled, the lights can be enabled/disabled from this icon
(systems only)
•
UNIT ICON; the user can change between °C and °F for display
Touchscreen Backlight
Further Settings and
Information
The touchscreen backlight level can be adjusted through the maintenance mode. During the normal
operation after 30 seconds of inactivity, the touchscreen dims to the "stand-by" level set. If the
backlight level is set to 0, the screen backlight switches off.
By pressing the DIM icon when the screen is active the screen is immediately dimmed to the
"stand-by" level. Pressing the DIM icon when the device is in the "stand-by level", switches the
backlight OFF.
The screen backlight is automatically activated when it is touched.
NOTE: To enter FURTHER SETTINGS screen, press SMALL ACTION CIRCLE (temperature
display) on the home screen.
The FURTHER SETTINGS shows additional user settings options on the
EIO
thermostats:-
•
OFF icon to switch thermostat to OFF
