Easy xLogic, Руководство пользователя

Страница: 82 / 226

80 80 80 80
Analog ramp: AQ
Analog math: AQ
PI controller:AQ
Data latching relay: AQ
Up/Down counter: Cnt
The value of
＂Ｔ＂， ＂ＴＬ＂
can be set/modified in parameter mode. For information about how
to modify, refer to chapter 5.2.2 please.
Timing Timing Timing Timing diagram diagram diagram diagram
Description Description Description Description of of of of the the the the function function function function
Output Q is set to 1 with a 0 to 1 signal transition at Trg.
If output Q = 0, and input Trg is set hi at least for the duration of TL, the permanent lighting
function is enabled and output Q is set accordingly.
The off delay time T is triggered when the status at input Trg changes to 0 before the time T
L
has expired.
Output Q is reset when the Ta = T.
Before the off delay time (T - T
!
) has expired, you can output an off pre-warning that resets Q
for the duration of the off pre-warning time T
!L
. A further signal at input Trg always resets T and
output Q.
Caution Caution Caution Caution
The time base for the T, T
!
and T
!L
must be identical.
If retentivity is not set, output Q and the expired time are reset after a power failure.
4 4 4 4.4.11 .4.11 .4.11 .4.11 Weekly Weekly Weekly Weekly timer timer timer timer
Caution
Caution Caution
Caution
Your xLogic must be equipped with an internal real-time clock if you are going to use this SFB.
Short Short Short Short description description description description
The output is controlled by means of a configurable on/off date. The function supports any
combination of weekdays.