14
4.5 Measure and Source of Resistane
Measure
Press
to select
mode. If necessary, press
to select resistance
function with the unit of . The interface is shown in Figure 4.5-1:
Figure 4.5-1
Attention: Over range indicate when the connection open
.
Resistance measurement supports the connection types of two-wire, three-wire and
four-wire. The calibrator can be switched to three-wire or four-wire according to actual
connecting type. The respective connecting types are shown in Figure 4.5-2:
Figure 4.5-2
Press
or
to select a 2-, 3-, or 4- wire connection and then the calibrator will
