4
12
Set output by 0% of span. Press and hold to store the source value as the
0 % value.
13
Decrements output by 25 % of span.
14
Increments output by 25 % of span.
15
Sets output by 100% of span. Press and hold to store the source value as
the 100 % value.
16
Cycles the calibrator through MEASURE and SOURCE modes in the
lower display.
17
Selects TC (thermocouple) measurement and sourcing function in the
lower display. Repeated pushes cycle through
the thermocouple types.
18
Selects current or transducer (SIM) function.
19
Selects RTD (resistance temperature detector) measurement and
sourcing function in lower display. Repeated pushes
cycle through the RTD types.
20
Selects voltage or frequency function
