19
measurement, automatic compensation directly using machine internal cold end
temperature compensation and manual compensation through the key to set the cold
end temperature compensation by the user.
5.1.1 Automatic compensation
First entered the thermocouple measurement mode, the default of the cold end
temperature compensation is automatic compensation reading as shown in Figure
5.1.1-1.The
sign represents that the current cold end temperature
compensation is automatic compensation. If you need further view current automatic
cold end temperature compensation value,you have to operation
key. Reading
as shown in Figure 5.1.1-1,after press
key, the
sign is replaced for
current automatic cold end temperature compensation value as
. The value
continue to display for 2s and then automatically return to the
sign.
Figure 5.1.1-1
5.1.2 Manual compensation
Manual compensation through the key to set the cold end temperature
compensation by the user, the following steps shall be followed:
1.
Press
key to enter the set mode, reading as shown in Figure 5.1.2-1, the
appear of
sign shows that entering the setup mode, the assistant
value
means the value of manual compensation
.
