background image

4

Owner’s Manual

CHIPPER SHREDDER

Get parts online at  

www.GetEarthquake.com 

or Call 

800-345-6007 

M-F 8-5 CST

NOTICE

 

NOTICE

 INDICATES YOUR EQUIPMENT CAN BE DAMAGED 

  IF THE SAFETY INSTRUCTIONS THAT FOLLOW THIS SIGNAL 

  WORD ARE NOT OBEYED. 

WARNINGS AND SAFETY PRECAUTIONS

OWNER’S RESPONSIBILITY
Accurate assembly and safe and effective use of the machine is 

the owner’s responsibility.

• 

Read and follow all safety instructions.

• 

Carefully follow all assembly instructions.

• 

Maintain the machine according to directions and  

schedule included in this Earthquake® operator’s manual.

• 

Ensure that anyone who uses the machine is familiar with 

all controls and safety precautions.

SPECIAL MESSAGES
Your manual contains special messages to bring attention to 

potential safety concerns, machine damage as well as helpful 

operating and servicing information. Please read all the infor-

mation carefully to avoid injury and machine damage.

NOTE: General information is given throughout the manual 

that may help the operator in the operation or service of the 

machine.

 

  This symbol points out important safety instructions 

 

which if not followed could endanger your personal 

 

safety. Read and follow all instructions in this manual 

 

before attempting to operate this equipment.

BEFORE OPERATING EQUIPMENT:
Please read this section carefully.
 Read entire operating and 

maintenance instructions for this product.  Failure to follow in-

structions could result in serious injury or death.   Operate the 

machine according to the safety instructions outlined here and 

inserted throughout the text.  Anyone who uses this machine 

must read the instructions and be familiar with the controls.

  CAUTION

 CAUTION INDICATES A HAZARD WHICH, IF NOT AVOIDED, 

  COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY 

 DAMAGE. 

  WARNING

 WARNING INDICATES A HAZARD WHICH, IF NOT AVOIDED, 

  COULD RESULT IN DEATH OR SERIOUS INJURY AND/OR 

  PROPERTY DAMAGE. 

  DANGER

 DANGER INDICATES A HAZARD WHICH, IF NOT AVOIDED, 

  CERTAINLY WILL RESULT IN DEATH OR SERIOUS INJURY 

  AND/OR PROPERTY DAMAGE. 

IMPORTANT

 

IMPORTANT

 INDICATES HELPFUL INFORMATION FOR 

  PROPER ASSEMBLY, OPERATION OR MAINTENANCE OF 

  YOUR EQUIPMENT. 

  WARNING

 YOU MUST READ, UNDERSTAND AND COMPLY WITH ALL 

  SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL 

  BEFORE ATTEMPTING TO SETUP AND OPERATE YOUR 

 MACHINE.

 FAILURE TO COMPLY WITH ALL SAFETY AND OPERATING 

  INSTRUCTIONS CAN RESULT IN LOSS OF MACHINE 

  CONTROL, SERIOUS PERSONAL INJURY TO YOU AND/OR 

  BYSTANDERS, AND RISK OF EQUIPMENT AND PROPERTY 

  DAMAGE. THE TRIANGLE IN THE TEXT SIGNIFIES 

  IMPORTANT CAUTIONS OR WARNINGS WHICH MUST BE 

 FOLLOWED.

Содержание 18493

























Отзывы: