background image

5

Owner’s Manual

CHIPPER SHREDDER

Get parts online at  

www.GetEarthquake.com 

or Call 

800-345-6007 

M-F 8-5 CST

GENERAL OPERATING SAFETY

• 

Read the operating and service instruction manual 

carefully. Be throughly familiar with the controls and the 

proper use of the equipment. Know how to stop the unit 

and disengage the controls quickly. 

• 

Do not operate the equipment without wearing adequate 

outer garments and safety goggles. Avoid loose-fitting 

clothes and use protective footwear that will improve 

footing on slippery surfaces. 

• 

Dress appropriately when operating the chipper shredder. 

Always wear sturdy footwear and safety goggles. Never 

wear sandals, sneakers or open shoes, and never operate 

the chipper shredder with bare feet. Do not wear loose 

clothing that might get caught in moving parts.

• 

Never allow children to operate the equipment. Never 

allow adults to operate the equipment without proper 

instruction. 

• 

Only allow responsible adults, who are familiar with the 

instructions, to operate the unit (local regulations can 

restrict operator age).

• 

Keep the area of operation clear of all persons, particularly 

small children and pets. 

• 

Always maintain secure footing and solid balance while 

starting or operating the chipper shredder. Never lean 

directly over the machine.

• 

Never operate the machine at high transport speeds on 

hard or slippery surfaces.

• 

Operate the machine only in daylight or good artificial 

light.

• 

Do not operate the unit while under the influence of alco-

hol or drugs.

• 

Exercise caution to avoid slipping or falling. 

• 

Always wear eye and hearing protection when operating 

this unit.

• 

Keep in mind the operator is responsible for accidents 

occurring to other people or property.

• 

Never operate the machine without proper guards, plates, 

or other safety protective devices in place.

• 

Do not put hands or feet near or under rotating parts or at 

inlet or discharge openings. 

• 

Thoroughly inspect where equipment is to be used and 

remove all foreign objects. 

• 

Exercise extreme caution when operating on or crossing 

gravel drives, walks or roads. Stay alert for hidden hazards 

or traffic. 

• 

Never allow bystanders near the unit while running. 

• 

Do not put hands or feet near rotating parts or under the 

machine.  Keep clear of the discharge opening at all times.

• 

Always operate the chipper shredder outdoors, on a firm, 

level, earthen or grassy surface where the unit will be 

stable and stay in position.  Never attempt to operate the 

unit on a slope, or on a wet or slippery surface where you 

could slip and fall toward the chipper cone or hopper 

openings.

• 

If the machine should start to vibrate abnormally, stop 

the engine (motor) and check immediately for the cause. 

Vibration is generally a warning sign of trouble. 

  WARNING

 COMBUSTIBLE DEBRIS CAN CATCH FIRE. IT IS A VIOLATION 

  OF CALIFORNIA PUBLIC RESOURCE CODE, SECTION 4442, 

  TO USE OR OPERATE ENGINE-POWERED PRODUCTS 

  ON ANY FOREST-COVERED, BRUSH-COVERED, OR GRASS- 

  COVERED LAND UNLESS THE EXHAUST SYSTEM IS 

  EQUIPPED WITH A SPARK ARRESTER, AS DEFINED IN 

  SECTION 4442, MAINTAINED IN EFFECTIVE WORKING 

  ORDER. OTHER STATES OR FEDERAL JURISDICTIONS MAY 

  HAVE SIMILAR LAWS. CONTACT THE ORIGINAL EQUIPMENT 

  MANUFACTURER, RETAILER, OR DEALER TO OBTAIN A 

  SPARK ARRESTER DESIGNED FOR USE WITH THIS PRODUCT.

  DANGER

 THE CHIPPER SHREDDER HAS SPINNING BLADES THAT  

  CAN AMPUTATE HANDS AND FEET. DO NOT PLACE HANDS 

  OR FEET IN THE HOPPER OR CHIPPER CONE, OR DISCHARGE 

 CHUTE. 

  WARNING

 THIS UNIT DISCHARGES DEBRIS AT HIGH SPEEDS. ALWAYS 

  WEAR PROTECTIVE GOGGLES AND DO NOT OPERATE 
  WITHOUT THE DEBRIS BAG IN PLACE. 

 DO NOT ALLOW ANYONE IN THE AREA WHILE THE UNIT IS 

  RUNNING. IF SOMEONE DOES ENTER THE AREA, SHUT THE 
  UNIT OFF IMMEDIATELY UNTIL THEY LEAVE. ORGANIZE 
  THE WORK AREA PRIOR TO STARTING WORK.

Содержание 18493

























Отзывы: