For Stationary Units, install undershelf and legs.
If your unit is a Mobile Unit, skip this page and refer to page 6.
(continued on next page)
Electric Hot Food Table with Sealed-in Wells (SHT Series)
ASSEMBLY INSTRUCTIONS
5
1. After removing crate above shipping pallet, gently lay the unit onto its back.
Caution:
Use cardboard or other material to prevent scratching.
2. Install legs into undershelf gussets with feet to underside of shelf.
3. FOR UNITS WITH ADJUSTABLE UNDERSHELF (
fig. A
):
• Loosely tighten set screws on undershelf. Work legs into gussets on underside of unit and tighten set screw securely.
• Adjust undershelf to desired height and tighten set screws securely.
• Repeat on remaining legs and undershelf corners.
FOR UNITS WITH BOLTED-IN UNDERSHELF (
fig. B
):
• On each leg, run undershelf bolt through hole in leg and into undershelf corner.
• Secure with undershelf nut. Repeat on remaining legs and undershelf corners.
4. Place table upright.
fig. A
fig. B
Units with Adjustable Undershelf
Units with Bolted-In Undershelf
*
To be compliant with NSF
guidelines, set screws must be
filled with NSF-approved sealant.
set
*
screw
set
*
screw
set
*
screw
