1. Attach support shelf brackets to support shelf, using
acorn nuts, washers, bolts and predrilled holes.
Note: acorn nuts must be at the top.
2. Install 1/4˝-20 x 3/4˝ screws into threaded fasteners on
hot food table. Do not tighten.
3. Align keyholes in mounting brackets with screws and
mount support shelf/bracket assembly to table. Tighten
screws.
4. Hook metal plate shelf into bottom flange of plate shelf
brackets.
5. Using keyholes on support shelf brackets, mount plate
shelf/bracket assembly onto support shelf/bracket
assembly.
6. Align holes in cutting board with acorn nuts, and place
cutting board onto support shelf.
Assemble the cutting board and plate shelf.
Refer to the illustration below and follow the assembly instructions.
SUPPORT
SHELF
BRACKET
PLATE SHELF
BRACKET
WASHER
HEX BOLT
ACORN NUT
10-32 X 3/4˝
SCREWS
STAINLESS STEEL SUPPOR
T SHELF
METAL PLA
TE SHELF
CUTTING BOARD
Electric Hot Food Table with Sealed-in Wells (SHT Series)
ASSEMBLY INSTRUCTIONS
7
(continued on back page)
