Eagle Eye SG-1000, Руководство пользователя

Страница: 14 / 21

Eagle Eye SG-1000C User Manual
13
7. Explanation of Error Messages
The SG-1000 will indicate an error message when there is a problem with the operation
on the instrument. Error messages that may be displayed are explained below.
“AAA” Zero-setting error

Zero-setting was performed
without water in the Sample
Chamber.

Zero-setting was performed with
a sample other than water in the
Sample Chamber.
Note: This error message may not occur
when the concentration of the sample is
low (close to that of water). Be sure
distilled or tap water is used when
performing zero-set.
“LLL” Sampling error

Electrolyte in the Sample
Chamber is insufficient to cover
the prism surface or air bubbles
may be present.
“HHH” Range-over error

The sample measured is out of
range of the SG-1000.
“HHH” Battery error

This error message is displayed
after zero-setting and
measurement when the battery is
low. Replace the battery with a
new one.

The SG-1000 may operate in an
abnormal manner without
displaying the “HHH” when the
battery is low. Replace the battery
when abnormal operation is
noticed.
“. . .” Temperature Error

The temperature of the
sample in the Sample
Chamber is below 14 degrees
F or above 122 degrees F.

This error will also appear
after zero-setting if the
temperature is out of range.
8. Temperature Display