Eagle Eye GD-3000 User Manual
1. GENERAL SAFETY INFORMATION
1.1 Intended Use
The Eagle Eye GD-3000 Combustible Gas Detector, Controller, and Transducer is a low
voltage device with selectable 4-20mA output, buzzer and digital display options. It is an
electronic detection system used to measure the concentration of combustible gas and
provide feedback and automatic exhaust fan control to help reduce combustible gas
concentrations in parking garages, maintenance facilities or other light commercial
applications. The Eagle Eye GD-3000 Combustible Gas Detector is a low level meter
capable of displaying from 0-50% LEL (Lower Explosive Limit) of combustible gas. The
Eagle Eye GD-3000 Combustible Gas Detector is factory calibrated and tested for
proper operation, but can also be calibrated in the field.
1.2 List of Warnings and Cautions within these User Instructions
WARNING
• Each person using this equipment must read and understand the information in these
User Instructions
before use. Use of this equipment by untrained or unqualified persons,
or use that is not in accordance with these
User Instructions,
may adversely affect
product performance and
result in sickness or death.
• Use only for monitoring the gas which the sensor and instrument are designed to
monitor. Failure to do so may result in exposures to gases not detectable and
cause
sickness or death
.
• GD-3000 may not function effectively below 0°F or above 125°F (-18°C or above
52°C). Using the detector outside of this temperature range may adversely affect
product performance and
result in sickness or death
.
• This detector helps monitor for the presence and concentration level of certain
specified airborne gases. Misuse may produce an inaccurate reading, which means that
higher levels of the gas being monitored may be present and could result in
overexposure and
cause sickness or death.
• Each time the unit is turned on it performs a self-test, which activates visual alarms. If
the self-test fails, or if all the alarms do not activate, do not use. Failure to do so may
adversely affect product performance and
result in sickness or death
.
• Do not cover or obstruct visual alarm. Doing so may adversely affect product
performance and
result in sickness or death
.
3
