Eagle Eye GD-3000 User Manual
The fifth selection
is the “ArS” or Alarm Relay Setting. Press
Next
four times to get to
“ArS” then press
Enter
. If the display is “OFF” (disabled) press
Next
to change it to 5,
10, 15, 20 or 25% LEL (flashing) then press
Enter
to confirm the change (solid) and
press
Enter
again to return to “ArS” in the Con menu. Press
Next
until “End” is
displayed then press
Enter
to return to normal operation.
Selecting Alarm Relay Configuration – “Arc”
To select the
Alarm Relay Configuration
, in normal mode, press the
Next
button twice
to get to “Con” or the Configuration menu. Then press the
Enter
button to enter the Con
menu.
The sixth selection
is the “Arc” or Alarm Relay Configuration. Press
Next
five
times to get to “Arc” then press
Enter
. If the relay is “nO” (normally open) press
Next
to
turn it to “nC” (flashing) then press
Enter
to confirm the change (solid) and press
Enter
again to return to “Arc” in the Con menu. Press
Next
until “End” is displayed then press
Enter
to return to normal operation
.
Selecting Fan Relay Settings – “FrS”
To select the Fan Relay setting, in normal mode, press the
Next
button twice to get to
“Con” or the Configuration menu. Then press the
Enter
button to enter the Con menu.
The seventh selection
is the “FrS” or Fan Relay setting. Press
Next
six times to get to
“FrS” then press
Enter
. If the fan relay is “OFF” (disabled) press
Next
to change it to 1,
2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 or 20% LEL (flashing) then
press
Enter
to confirm the change (solid) and press
Enter
again to return to “run” in the
Con menu. Press
Next
until “End” is displayed then press
Enter
to return to normal
operation.
Selecting Fan Relay Delay – “FrD”
To select the Fan Relay Delay setting, in normal mode, press the
Next
button twice to
get to “Con” or the Configuration menu. Then press the
Enter
button to enter the Con
menu.
The eighth selection
is the “FrD” or Fan Relay Delay. Press
Next
seven times
to get to “FrD” then press
Enter
. If the delay is “OFF” (disabled) press
Next
to change it
to 1, 3, 5, or 10 minutes (flashing) then press
Enter
to confirm the change (solid) and
press
Enter
again to return to “FrD” in the Con menu. Press
Next
until “End” is displayed then press
Enter
to return to normal operation.
Selecting Fan Minimum Run Time – “Frr”
To select the Fan Minimum Runtime setting, in normal mode, press the
Next
button
twice to get to “Con” or the Configuration menu. Then press the
Enter
button to enter
the Con menu.
The ninth selection
is the “Frr” or Fan Minimum Run Time. Press
Next
eight times to get to “Frr” then press
Enter
. If the runtime is “OFF” (disabled) press
Next
to change it to 3, 5, 10 or 15 minutes (flashing) then press
Enter
to confirm the change
14
