©
EAE Technology
www.eaetechnology.com
Page 20 / 21
Product Manual MD
100
EAE KNX Presence Detector
MD
100
PM R
1.0
Yes: “Switch ON delay time” and “Stay ON time” objects are created and possible read/write to these
objects.
No: “Switch ON delay time” and “Stay ON time” objects are not visible.
Disable light level control
*no
ON for disabling / OFF for enabling
OFF for disabling / ON for enabling
This parameter determines the value type for disabling/enabling light level control.
No: Disable constant light level object is not visible.
ON for disabling / OFF for enabling: Light level control is disabled with the value “ON” and enabled
with the value “OFF”.
OFF for disabling / ON for enabling: Light level control is disabled with the value “OFF” and enabled
with the value “ON”.
Behaviour disable lighting
*no action
Light ON
Light OFF
This parameter is used for selecting whether a telegram is sent to lighting group before disabling
“light level control” and, if so, with which value.
No action: No telegram is sent before disabling “light level control”.
Light ON: Lighting group is set to the value “ON” before disabled.
Light OFF: Lighting group is set to the value “OFF” before disabled.
Behaviour enable lighting
*no action
Light ON
Light OFF
This parameter is used for selecting whether a telegram is sent to lighting group after enabling “light
level control” and, if so, with which value.
Continue control: After enabling the “light level control”, detector keeps the current status of lighting
group.
Light ON: After enabling the “light level control”, it is set to the value “ON”.
Light OFF: After enabling the “light level control”, it is set to the value “OFF”.
3.8
HVAC