37
CHANGING
optic
CARTRIDGE
y
STEP 7
CLOSING THE APPLICATOR
•
Bring the mobile part of the applicator closer to its fixed part.
•
Reposition the mobile head so as to match the red dot of the fixed part with the
internal red dot of the mobile head (image
O
, turquoise arrows).
•
Set off the mobile part again by delicately pressing on the locking tabs to hold the
mobile head (image
O
, pink arrows).
y
STEP 8 (ONLY FOR
)
INSERTING A NEW ACTIVATION CARD
• There is no need to enter any code.
• Remove the old activation card and insert the new card that has been delivered with
its
optic
cartridge, in the slot provided for this purpose (image
P
).
• Each activation card bears the same serial number as the
optic
cartridge has been
provided. Each activation therefore only works with only a single
optic
cartridge
and must not be used with another cartridge.
• If you run out of flash credits while using the device, the warning screen (screen
Q
)
will appear.
• If there is no activation card or if the activation card is damaged, the warning screen
(screen
R
) will appear.
T
You might have to change the cartridge before the expiration of the number of flashes initially planned, when, for example, a
tube has been broken, or is not working anymore. For any change of
optic
cartridge outside the normal procedure, please
refer strictly to the instructions given by our technical department.
y
STEP 9 (ONLY FOR
)
IN THIS CASE, IT IS COMPULSORY TO ENTER ACTIVATION CODES FOR
THE
OPTIC
CARTRIDGE.
• Plug in and turn on your device
10
.
• Once the home screen is displayed, go to the “Consumables” menu.
• Select icon
21
, which corresponds to the addition of flashes.
• With the help of the digital keyboard:
- Enter the first cartridge code, and validate with the “V” button.
- Enter the second cartridge code, and validate with the “V” button.
• The “C” button enables you to correct the digits in each box.
• If the cartridge code is correct, the message "Valid Code" will be displayed on the
screen. You must then click OK. The "Consumables" menu appears (screen
T
); the
modification of the flashes credit meter means that the new flashes have been
well credited (icon
21
).
• If you have entered a wrong code, after validation, an error message will be
displayed (screen
U
): the "Consumables" menu appears again.
• Using the go back icon
8
(screen
S
), it is possible to go back to the home screen.
• The cartridge codes are unique, they take into account the serial number of your
machine and will not work on another
, or on any other device made
available by E-Swin SAS.
Icon
5
(screen
S
) followed by its number of days is displayed only in rental mode.
In sale mode, no icon is displayed at this location.
S
36
U
885
1000
1000
Consumables
885
Careful
Numeric keypad
Code refused
10
21
8
5
Flash credit expired
Insert card
R
Q
P
O
