E-ride Industries 2013 Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 102

background image

e-ride Industries

Page 98

Parts Purchase from e-ride Industries

All parts purchased from e-ride are given a 6 month warranty.

Disclaimer

This limited warranty is exclusive, e-ride Industries makes no other warranty of any kind, expressed or
implied. Any implied warranties of merchantability or fitness for a particular purpose which exceed
the obligations or time limits stated in the warranty are hereby disclaimed by e-ride and excluded from
the warranty. The purchaser and e-ride expressly agree that the remedy or repair/replacement of the
defective vehicle or component thereof is the exclusive and sole remedy of the purchaser. e-ride
Industries makes no other representation or warranty of any kind, and no representative or employee of
e-ride Industries has the authority to make or imply any representation, promise, or agreement which in
any way varies the terms of this warranty. e-ride Industries reserves the right to modify this warranty
at any time, being understood that such modification will not alter warranty conditions applicable to
the vehicle sold while this warranty is in effect.

Sole Remedy

e-ride industries is only liable under this limited warranty, or in any action whether based upon
warranty, contract, negligence, strict product liability or otherwise, is limited to the repair or

«
...
98
99
100
101
102
»

Содержание 2013







































































































Отзывы:

Нет отзывов

Похожие инструкции для 2013

Бренд: Zavoli Страницы: 26

MagicWatch MWE800

Бренд: Waeco Страницы: 212

Бренд: Quadratec Страницы: 12

Бренд: Mitsubishi Страницы: 19

Бренд: cam Страницы: 28

Бренд: Paser Страницы: 2

Бренд: Xblitz Страницы: 56

Бренд: Skoda Страницы: 324

Бренд: Curtis Страницы: 6

Бренд: Mont Blanc Страницы: 2

Бренд: FORM FIT Страницы: 2

Бренд: Honda Страницы: 4

Бренд: Pet Gear Страницы: 4

Halo Pole Mount

Бренд: Charge Amps Страницы: 14

Бренд: Roadefend Страницы: 15

Бренд: Gator Страницы: 5

Бренд: Saab Страницы: 16

Бренд: N2MB Racing Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды