E-Mu XL-7 Command Station Скачать руководство пользователя страница 136

Страница: 136 / 384

124

E-MU Systems

Sequencer

Song Edit Menu

Note List Editor

Individual MIDI notes in the song can be edited, inserted or deleted from
this screen.

Place the cursor underneath the “Event Scroll Field” shown

below and turn the data entry control to navigate through events.

•

Hold the

Enter

button and turn the

data entry control

to scroll through

events when the cursor is on any other field.

•

Erase

button - - - - - Erases the currently selected event.

•

Repeat

button - - - - Duplicates the currently selected note, allowing you

to edit and create a new note.

1) Press Repeat.
2) Change the time, channel, or MIDI note.

Note:

You cannot have two events with the exact same time and data in

a song. XL-7 will delete any duplicate events as soon as you increment
the event or exit the screen.

To Edit a MIDI Note

Select the song

you wish to edit.

Press the

Song Edit

button.

Scroll to the

Note List Editor

screen shown below using the data entry

control.

Press the

Enter

button as prompted by the display to begin editing.

Press the

right Cursor

button to move the cursor underneath the Event

Scroll Field (<->).

Turn the

data entry control

to scroll through the event list and locate

the event you want to edit.

You can edit notes and

note velocity by playing the
keyboard.

Move the cursor to the data field you want to edit and make changes
using the data entry control.

Press the

Song Edit

button to exit the Song Edit module.

01 NOTE <->

002.03.008

C01 C#1 v:100 dur:00.083

Track 01

MIDI

Channel

MIDI
Note

Note

Velocity

Note

Duration

Time Location

Event Scroll Field

(scroll though events)

01 NOTE <->

002.03.008

C01 C#1 v:100 dur:00.083

Содержание XL-7 Command Station

































































































































































































































































































































































































Результаты поиска

Содержание XL-7 Command Station

Отзывы:

Похожие инструкции для XL-7 Command Station

Бренды по названию

Популярные бренды

E-Mu XL-7 Command Station, Руководство пользователя

Результаты поиска

Содержание XL-7 Command Station

Отзывы:

Похожие инструкции для XL-7 Command Station

Бренды по названию

Популярные бренды