E-Mu XL-7 Command Station, Руководство пользователя

Страница: 152 / 384

140 E-MU Systems
Controllers Menu
Trigger Buttons
Trigger Buttons
Select Triggers mode by pressing the mode select button so that the
“Triggers” LED is illuminated. Now the 16 buttons work like keyboard
notes. Each of the 16 buttons can be assigned to any MIDI note, on any
MIDI Channel (01A-16B), with any velocity (0-127), and can be set to be
latched or momentarily on. Latched notes will hold until the button is
pressed again. Latched notes will be indicated by the LEDs. Each trigger can
also be routed to: the internal synth engine, to the MIDI ports, both
internal and MIDI, or to the sequencer input.
O O
O O
Use the Trigger Button
Key Velocity to adjust the volume
of Beats relative to volume of the
Pattern or Song.
Simply move the cursor from the “TRIGGERS” field and play a note to enter
the MIDI key and velocity. Pressing a Trigger Button anytime while in this
screen automatically selects that trigger button for programming!
See the block diagram showing “Triggers & Programmable Knobs” on
page 339 for detailed information about the actual routing path.
O O
O O
Latched buttons are
especially useful for triggering
arpeggiated presets.
To Setup the Trigger Buttons to trigger MIDI Notes:
1.
Press the Controllers button. Its LED will illuminate.
2.
Turn the data entry control to select the “TRIGGERS” screen.
3.
Use the left/right cursor controls to select the fields shown above.
4.
Select the MIDI key, the MIDI channel, the Velocity, Latch on/off and
destination for each of the 16 trigger buttons.
5.
Save the Multisetup if you want to save these settings. See page 149.
To Play the Trigger Buttons:
1.
Press the Mode button so that the Triggers LED illuminates.
2.
Play the Trigger buttons.
TRIGGER BUTTONS FUNCTION
Play Note Events
T1 TRIGGERS D3 Vel: 127
Latch:off Ch: 01A seq
Trigger Button Select
Latch on/off
MIDI Key
MIDI Channel
Destination
Key Velocity
O O
O O
Trigger button
presses can be recorded
into patterns and songs.