manualshive.com logo in svg

E-Mu EMAX II, Руководство по эксплуатации, Страница: 71 / 257

Поделиться
Скачать
E-Mu EMAX II Скачать руководство пользователя страница 71

Emax II operation manual

60

MASTER 7

BIRD RUN

This function aligns Emax II’s internal stabilizers and prevents excessive gyro-
cosmic relativation.

1. Activate 

MASTER 7

.

2. Carefully observe the display for any signs of destabilization (eg. gravitational warps,
apparent speeding up or slowing down of time, objects in mirrors appearing closer than
they really are). If Emax II returns to the module identifier after a few seconds, all is well.

Note: Occasionally a small emu will get trapped within the Emax II and run across the
screen during the stabilization scan process. This does not affect Emax II’s normal
functions.

MASTER 8

BACKUP/RESTORE

This module allows you to backup either a portion or the entire contents of the
hard disk on 3.5" micro-floppy diskettes. These functions make backup so easy
that you will have no excuse for not backing up all your hard disk banks!
Remember, If you would hate to lose it, BACK IT UP.

Note: Please read through all of the Backup/Restore procedures and try them out as
well. These very flexible routines are designed to fit almost any style of backup you may
have.

1. Activate 

MASTER 8

. The display says:

Backup/Restore
[0-9] / Slider]

Select the desired function using the data slider or keypad.

0) Define Custom
1) Copy HD To HD
2) New Banks Only
3) Selected Banks
4) Custom Backup
5) ContinueBackup
6) BackuptoFloppy
7) NewBanksToFlpy
8) SelectedTo Flpy
9) Floppy Restore

MASTER

Bird Run

Содержание EMAX II


































































































































































































































































Отзывы:

Нет отзывов