manualshive.com logo in svg

E-Mu EMAX II, Руководство по эксплуатации, Страница: 46 / 257

Поделиться
Скачать
E-Mu EMAX II Скачать руководство пользователя страница 46

Emax II operation manual

35

GUIDED TOUR #6:

DIGITALLY PROCESSING SAMPLES

BACKGROUND and SETUP

Digital processing allows for radically altering voices stored in the bank. In this Guided
Tour, we’ll learn — among other topics — how to truncate, loop, reverse, splice, and
combine samples. First, though, we need to take a couple of samples with which we can
practice.

1. Clear the bank of memory (

MASTER 4

).

2. Follow the directions in Guided Tour #5 and make a sample of yourself speaking.
However, select a 4 second sample length (

SAMPLE 4)

. After setting the threshold and

such, arm sampling and start jabbering.

3. De-activate the sample module, then re-activate and take another 4 second sample.
You will not have to do any setup — just hit

 SAMPLE 6

 and talk away. You now have

two samples suitable for experimentation.

CHOOSING THE CURRENT VOICE

Activate 

DIGITAL PROCESSING

. You will be asked to select a voice, so press a key

within the range of the voice that you want to work on and press 

ENTER

.

TRUNCATING A VOICE

1. Choose 

DIGITAL PROCESSING 1

 to truncate the ends from voices.

2. Vary the data slider as you play a key in the range assigned to the current voice. Notice
the start of the voice will disappear. Use this technique to get rid of silence at the start of
a voice or for effects.

3. Move the cursor using the arrow keys to the End display. Use the data slider to truncate
any undesired part off the end of the sample.

4. When you get tired of truncating, press 

ENTER

. When Emax II asks if you want to

“Make Truncation Permanent?”, enter 

NO

 so that the full sample is available for

subsequent experiments in this tour.

5. If desired, change the current voice (

DIGITAL PROCESSING 0

) and experiment with

truncating the other sample you took. Again, when asked if you want to “Make
Truncation Permanent?”, press 

NO

.

LOOPING A VOICE

1. If you haven’t yet done so, activate the 

DIGITAL PROCESSING 

module and assign

the current voice. Select function 4 and turn the loop mode 

ON

.

GUIDED TOURS

Guided Tour #6

Содержание EMAX II


































































































































































































































































Отзывы:

Нет отзывов