E-Mu EMAX II Скачать руководство пользователя страница 70

Страница: 70 / 257

Emax II operation manual

After formatting is complete, the display asks:

Format Another
Disk? Y/N

To format another disk, remove the newly formatted disk from the drive, insert the next
disk to be formatted in the drive, then press

YES

. Otherwise, press

, whereupon the

display returns to the module identifier.

MASTER 6

ERASE HD BANK

This function lets you erase an entire bank from a hard disk in order to make room
for other sounds.

1. Activate

MASTER 6

. The display says:

Erase Disk Bank
BXX Name of Bank

...where “XX” is the bank number and “Name of Bank” is the name of the bank.

Note: The “Name of Bank” is simply the current preset at the time that the bank was
saved.

2. Select the hard disk bank that you wish to erase and press

ENTER

The display says:

Erases HD Data
Are You Sure?Y/N

3. Press

YES

to erase the bank or

to return to the module identifier.

MASTER

Erase HD Bank

Содержание EMAX II


































































































































































































































































Результаты поиска

Содержание EMAX II

Отзывы:

E-Mu EMAX II, Руководство по эксплуатации, Страница: 70 / 257

Результаты поиска

Содержание EMAX II

Отзывы: