E-Mu EMAX II, Руководство по эксплуатации, Страница: 153 / 257

Emax II operation manual
142
Application Hint: When assigned to the right wheel, rotating the wheel away from you
increases the amount of tremolo. Assigning this destination to the pedal provides foot-
controlled tremolo. Tremolo is useful for “Bo Diddley” and surf music guitar sounds, as
well as for simulating some electric piano sounds. Assigning this destination overrides
the equivalent Dynamic Processing module function.
●
Destination: 7 ATTACK RATE
ATK RATE controls the VCA and VCF attack rate. To assign this destination to the
control source, first select the control source then select 7.
Application hint: When assigned to the right wheel, rotating the wheel away from you
increases the attack time. This effect is useful when changing from legato to percussive
effects, especially with sustained sounds such as strings.
Note: With ATK RATE assigned to a wheel, Dynamic Processing module function 12,
VCA attack (A) and module function 14, filter attack (A) are disabled. Therefore, filter
and VCA attack rates are determined solely by the wheel setting.
●
Destination: 8 PANNING
PANNING controls the spatial placement of the sound in the stereo field. To assign this
destination to the control source, first select the control source then select 8.
Application Hint: When assigned to the left wheel, rotating the wheel away from you
places the sound in one channel, rotating the wheel towards you places the sound in the
other channel, and center wheel position places the sound in the center of the stereo field.
You can also use the pedal for foot-controlled panning.
Note: Assigning this destination overrides the equivalent Dynamic Processing
module function.
●
Destination: 9 XFADE
XFADE allows you to crossfade between the primary and secondary voices in a preset.
To assign this destination to the control source, first select the control source then select
9.
Applications Hint: When assigned to the left wheel, this function also provides for real
time changes in mix between two separate sounds (e.g., strings can fade out while brass
fades in, or vice-versa).
Note: This function must also be enabled under Preset Definition function 5 (Velocity
XFade).
Realtime Controls
PRESET DEFINITION