E-Mu EMAX II Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 257

E-Mu EMAX II Скачать руководство пользователя страница 4

Emax II operation manual

WARNING: READ THIS FIRST

■

This symbol is intended to

alert the user to the pres-
ence of uninsulated dan-
gerous voltage within the
product's enclosure that
may be of sufficient magni-
tude to constitute a risk of
electric shock to persons.

■

This symbol is intended

to alert the user to the pres-
ence of important operating
and maintenance (servic-
ing) instructions in the lit-
erature accompanying the
appliance.

Precautions

IMPORTANT SAFETY INSTRUCTIONS

Changing the voltage selector may require the use of a different line cord or attachment plug, or
both. To reduce the risk of fire or electric shock, refer servicing to qualified service personnel. To
reduce risk of fire or electric shock do not expose this product to rain or moisture.

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or break down, grounding provides a
path of least resistance for electric current, reducing the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet properly installed and grounded in accordance with
all local codes and ordinances.

DANGER

Improper connection of equipment grounding conductor can result in the risk of electric shock.
Check with a qualified electrician or service personnel if you are in doubt as to whether the product
is properly grounded. Do not modify the plug provided with this product — if it will not fit the
outlet, have a proper outlet installed by a qualified technician.

CAUTION

If the 2201-06 Emax II is rack mounted, a standard 19 inch open frame rack must be used. make
sure ventilation openings on the rear of the 2201-06, Emax II are not blocked.

USER-MAINTENANCE INSTRUCTIONS

1. The Emax II should be kept clean and dust free. Periodically wipe the unit with a clean, lint free
cloth. Do not use solvents or cleaners.

2. There are no user lubrication or adjustment requirements.

3. Refer all other servicing to qualified service personnel.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO PERSONS

WARNING;

When using electric products, basic precautions should always be

followed, including the following:

1. Read all instructions before using the Emax II.

2. To reduce the risk of injury, close supervision is necessary when the Emax II is used near
children.

3. Do not use the Emax II near water — for example near a bathtub, washbowl, kitchen sink, in a
wet basement, on a wet bar, or near or in a swimming pool.

4. The Emax II should be situated so that its location or position does not interfere with its proper
ventilation.

5. The Emax II should be located away from heat sources such as radiators, heat registers,
fireplaces, stoves, or ovens.

6. The Emax II should only be connected to a power supply of the type described in the operating
instructions and as marked on the product.

«
...
2
3
4
5
6
...
»

Содержание EMAX II


































































































































































































































































Отзывы:

Нет отзывов