18
E-flite Sobré 3D Profile Assembly Manual
Note
: The rudder and elevator pushrods attach to the
inside hole of the control horns.
11. Install the receiver using hook and loop material.
The exact position of the receiver may change,
depending on how your aircraft balances.
Motor and Battery Installation
Required Parts
Airframe
Plywood motor mount
Motor w/hardware
Electronic speed control
Propeller
#2 x 8mm or #3 x 8mm wood screw (included with motor)
Hook and loop material
Required Tools and Adhesives
Foam-compatible CA, Medium
Drill bit:
1
/
16
-inch (1.5mm)
Cardstock
Felt-tipped pen
Hobby knife
Screwdriver, #0 Phillips
Optional
Variable pitch prop
Sub-micro servo (1)