1
E-flite Sobré 3D Profile Assembly Manual
Installing the Bracing
Required Parts
Assembled airframe
Carbon rod, 4.6-inch (117mm) (2)
Carbon rod, 5.9-inch (150mm) (2)
Carbon rod, 4.3-inch (110mm) (2)
Carbon rod, 3.9-inch (100mm) (4)
Carbon rod, 3.75-inch (95mm) (4)
Carbon rod, 12.7-inch (323mm) (2)
Carbon rod, 12-inch (305mm) (2)
Required Tools and Adhesives
Foam-compatible CA, Medium
Sandpaper
Hobby knife
Side cutters
Eye protection
Note
: It is important that each carbon rod attaches to
the next, and to the carbon blade spars on the edges
of the foam. This is necessary to provide the stiffest
airframe possible.
1. Locate the two 4.6-inch (117mm) carbon rods. Pass
the rods through the fin and stabilizer. Butt the rods
together in the fin and use foam-compatible CA to
glue the rods to the fin ONLY at this time.
2. Use a square to align the stabilizer with the fin.
Once the fin is perpendicular to the stabilizer, use
Foam-compatible CA to glue the carbon rod to the
stabilizer. Square each side before gluing the rod on
that particular side.